Working through proxy
The Trade Terminal can work through Proxy-server, which is a bridge link between
the computer user and our server. Most often it is from the Internet service provider
or a local area network. To do so via the main menu item "Settings" "Network" creating
dialog, mark put in the 'Enable proxy "and push the button" Proxy...". In the window
dialogue "Proxy settings", you enter the proxy server address, port, type (HTTP,
SOCKS5, SOCKS4) and (if necessary, otherwise these fields blank) login and password access to the proxy server (this information is available from the provider or system
administrator). Then "OK".
Additionally, in case there is no connection or incorrect work, you have to check the tuning of the firewall of the proxy-server and do the following:
1. To work with the real account: open in the firewall of the proxy-server the ports: 80 (HTTP, TCP, outgoing), 21 (FTP, TCP, outgoing), 1441 (TCP, outgoing), 1442 (TCP, outgoing).
2. To work with the demo-account: open in the firewall of the proxy-server the ports: 8080 (Socks4, TCP, outgoing), 1443 (TCP, outgoing).
3. For working through some what proxy -server (for example Users gate version 3.1.3. and lower) you have to do portmapping, i.e. the destination port - the port mentioned in the Trade Terminal tuning (21, 80, 1441, 1442, 1443, 8080), and the listening port - any port higher than 1000 (for example for the port 21 -10021, for 80 - 10080, for 1441 - 11441 and so on).
|
Introduction
